Sony Walkman NWZ-W252 매뉴얼
7.1 · 1
매뉴얼Sony Walkman NWZ-W252
NWZ-W252/W253 4-180-852-12(1)
Press the jog lever upward.
Move the jog lever to (backward) or (forward).
Move and hold the jog lever to skip to the beginning of the previous or next folder.
Press the SHUF(Shuffle)/PLAYLISTS button to play back songs in random order.
During shuffle playback, you cannot skip to the previous or next folder, even if you move and
hold the jog lever.
Press and hold the SHUF(Shuffle)/PLAYLISTS button to play a playlist.
Move and hold the jog lever to (backward) or (forward) to skip to the beginning of the
previous/next playlist.
To return to playback of all the songs transferred to the player, press and hold the SHUF(Shuffle)/
PLAYLISTS button during playback of a playlist.
Note
When you play a playlist, only the songs registered in the playlist are played back repeatedly.
Press the jog lever upward.
©2010 Sony Corporation
4-180-852-12(1)
What is ZAPPIN Playback?
Checking Supplied Accessories
This player (1)• Stand with USB cable (1)•
Earbuds (Size S, L) (Supplied in pairs)
Operation Guide (this manual) (1)
•
•
Holder (1)
Notes on Water Resistant Specifications (1)
•
•
How to install the earbuds
At purchase, M size earbuds are installed (S and L sizes are also supplied). To enjoy better sound quality,
change the size of the earbuds or adjust the earbud position to fit in your ears comfortably and snugly.
When you change the earbuds, twist while installing them firmly on the player to prevent the earbud from
detaching and remaining in your ear.
If an earbud becomes damaged, optional earbuds (EP-EX1) are available for purchase.
How to store the player into the holder
To prevent magnetic leakage, store the player in the supplied holder whenever carrying or when not using
the player.
The magnet is on the right side.
Do not place credit cards or ATM cards,
etc. (magnetic coded cards) near the
player when it is not stored in the
holder to prevent damage to the
magnetic coding on the cards.
Hold the player by the holder and
close the holder until it clicks.
Parts and Controls
Neckband
OPR (Operation)
lamp
SHUF(Shuffle)/
PLAYLISTS button
Jog lever
VOL+*/- button
Status lamp
USB jack cover
RESET button
* There is a tactile dot on the
button. Use it to help with
button operations.
Headphone
section
How to place the player on your ears
These parts are magnetically coupled.
Hang the neckband over the back of your neck and ears, and place the earbuds into
2 Preparing the Player
Charging the player
Upon purchase, first, charge the player.
If a screen appears presenting a choice of actions, click “Cancel.”
Charging starts. The status lamp blinks slowly during charging. When charging is
completed, the status lamp will stop blinking and light dimly while the player is connected
to the computer. For details about charging time and the battery duration, see
“Specifications” on the reverse side.
Remaining battery power is indicated in the OPR lamp. When the OPR lamp changes to
red, recharge the battery.
Red*
Green*
Quick red
blinkingOrange*
* Blinks at about 5 second intervals.
When the battery is used up, the
OPR lamp blinks red quickly and
a long beep is heard. You cannot
operate the player.
1 Importing and
Transferring Music
This section describes the procedures from “Three Ways to Transfer Music” above.
For details on the procedures or , see the reverse side.
You can transfer songs to the player using Windows Media Player on your computer.
Here we describe how to import and transfer songs using Windows Media Player 11.
Import songs from CDs, etc., to Windows Media Player on the computer.
For details on how to import songs from CDs, etc., refer to the Help of Windows Media
Player. You do not need to re-import songs that have previously been imported to
Windows Media Player.
1 Click “Rip.”
2 Click here to start importing.
The status lamp blinks brightly while transferring songs to the player.
1 Choose albums, etc.
2 Click here to transfer to the player.
See also
“Hint about transferring music” and “Notes about transferring music” on the
reverse side.
3 Playing Music
When you press the jog lever upward or move it forward/backward after separating the left and
right parts of the player, the player will turn on and start playback. If you want to skip to the
previous/next song, move the jog lever after playback starts.
After you press the jog lever, the OPR lamp blinks green and red alternately and the beep is heard
repeatedly until the playback starts. Please wait until the OPR lamp blinking and the beeping
stops.
See also
“Hints about playing music” on the reverse side.
The player plays back song clips for about 4 seconds each.
If the most recognizable passage of the song cannot be found, the song is played back from about
the 45 second point from the beginning. If the length of the song is under about 45 seconds, the
song is played back from some point before the end of the song.
You can skip to the previous/next song, play back songs in random order, or play a playlist.
The method of operation is the same as for normal playback.
The playback time for song clips can be set to either “Long” or “Short.”
Zappin long
Zappin short
Press and hold the jog lever until either voice
guidance is heard.
When you press and hold the jog lever until
the voice guidance of “Zappin long” is
heard, the playback time of song clips
changes to about 15 seconds (Long). When
you press and hold the jog lever until
“Zappin short” is heard during “Long”
playback, the playback time of song clips
returns to about 4 seconds (Short).
Press the jog lever to return to normal playback, then press the jog lever again.
Operation Guide
Separate.
Press the jog lever to start playback.
Unite.
Press and hold the
jog lever during
playback until
“Zappin in” is heard.
Zappin in
Press the jog lever
during ZAPPIN
playback.
Zappin out
Three Ways to Transfer Music
1
*
1
Content Transfer supports data transfer from iTunes 9.0 to the player.
When you transfer songs using Content Transfer software with the 12 TONE ANALYSIS set to “Automatic” or
“Always ON,” the information of the most recognizable sections based on melody and rhythm will be found and
added to each song. Then, the most melodic and rhythmical clips from each song can be played back sequentially
during ZAPPIN playback.
Content Transfer is included with the player. For details on how to install Content Transfer, see
“How to
Install the Bundled Software.”
How to Install the Bundled
Software (Operation Guide included)
to the USB connector
Status lamp
Select “start” – “My Computer” or “Computer” – “WALKMAN” – “Storage Media.”
Note
W
hen you use the player for the first time, or if you have not used the player for a long time, the
player may take some minutes to be recognized by the computer.
The install wizard appears.
When you execute
“
Setup.exe,
”
the
“
Setup.exe
”
file and
“
Install
”
folder stored in the
“
Storage Media
”
folder of
the player are copied to your computer for backup, and WALKMAN Guide and Content Transfer are installed to
your computer.
After executing “Setup.exe,” the WALKMAN Guide shortcut appears on the desktop of your computer.
With the player connected to your computer, when installation of bundled software is completed, Content
Transfer starts automatically.
Double-click (WALKMAN Guide) on the desktop to start the WALKMAN Guide.
You can start the WALKMAN Guide and Content Transfer from the “start” menu (displayed by clicking
“start”).
If you delete the “Setup.exe” file and “Install” folder in the player by formatting the built-in flash memory
of the player, copy this data from the “Backup” folder on the computer to your player. Then connecting the
player to the computer to be installed, follow the above procedure from step to install.
The backup data is preserved in the following “C” drive on your computer by the default install setting.
C:\Program Files\Sony\WALKMAN Guide\NWZ-W250\Backup
The WALKMAN Guide includes the following items:
Operation Guide
Customer Registration Link
Customer Support Site Link
Other useful Links
Includes link information, etc., on the download site.
The bundled items differ depending on the country/region of purchase.
After executing “Setup.exe” you can use the free space in the “Storage Media” folder more effectively by
formatting the built-in flash memory of the player. To format the built-in flash memory of the player, see
“Formatting the player” on the reverse side.
Supplied Software
The software is stored in the built-in flash memory of the player, and includes
the following items:
Content Transfer
WALKMAN Guide
Operation Guide, etc.
For details on how to install, see
“How to Install the Bundled Software
(Operation Guide included).”
To view the Operating Guide (PDF file) on your computer, Adobe Acrobat
Reader 5.0 or later, or Adobe Reader is required. You can download a free copy
of Adobe Reader from the Internet.
여기에서 Sony Walkman NWZ-W252에 대한 매뉴얼을 무료로 보십시오. 이 매뉴얼은 카테고리 MP3 플레이어에 속하며 7.1 평균을 가진 1 사람들의 평가를 받았습니다. 이 매뉴얼은 다음 언어로 제공됩니다: 영어. Sony Walkman NWZ-W252에 대해 질문이 있습니까? 아니면 도움이 필요하십니까? 여기에 질문하십시오.
설명서에서 질문에 대한 답을 찾을 수 없습니까? 아래 Sony Walkman NWZ-W252에 대해서 FAQ에서 질문에 대한 답변을 찾을 수 있습니다.
블루투스란 무엇입니까?
블루투스는 전파를 통해 전자장치 간에 무선으로 데이터를 교환하는 방법입니다. 데이터를 교환하는 두 장치 사이의 거리는 대부분의 경우 10미터를 넘지 않습니다.
Sony Walkman NWZ-W252의 무게는 얼마입니까?
Sony Walkman NWZ-W252의 무게는 43 g입니다.
Sony Walkman NWZ-W252의 배터리를 충전하는 데 얼마나 걸립니까?
Sony Walkman NWZ-W252의 배터리를 충전하기 위해서는 1.5 시이 소요됩니다.
Sony Walkman NWZ-W252의 매뉴얼은 한국인에서 사용할 수 있습니까?
죄송합니다. 한국인에서 사용할 수 있는 Sony Walkman NWZ-W252에 대한 매뉴얼이 없습니다. 이 매뉴얼은 영어에서 사용할 수 있습니다.
귀하의 질문이 목록에 없습니까? 여기에 질문하십시오.
결과 없음
도움이 필요하십니까?
Sony 에 대해 질문이 있고, 그에 대한 답을 설명서에서 찾을 수 없나요? 여기에서 질문하십시오. 문제와 귀하의 질문에 대한 명확하고 포괄적인 설명을 제공하십시오. 귀하의 문제와 질문에 대해서는 다른 Sony 소유자가 더 쉽게 좋은 답변을 제공할 수 있습니다.
질문 수: 0